Hexprog 1.0.39 is available for users. We still focusing on VAG Ecus by OBD, so we have more Ecus in this version. VW, Audi, Skoda and Seat: SIMOS 18, SIMOS 18.1, SIMOS 18.2, SIMOS 18.4, SIMOS 18.6 Virtual read, OBD write, and checksum correction. VW: EDC17C54 Virtual read, OBD write, and checksum correction. VW, Audi, Skoda and…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. This update fixes some issues appeared in last release, as well as some minor bugs reported by Autohex II users recently.
Hexprog 1.0.40 is avialble for users. In this version we added more Ecus for repairing and tuning by OBD VW, Audi, Skoda and Seat: Added Bosch EDC17CP56 and EDC17CP74, Virtual read, OBD write , CVN correction and checksum correction.
Hexprog 1.0.41 is avialble for users,This version supports Mercedes Benz EDC17X by OBD, it also added support for Hyundai Kia Continental Ecus and Tcus. Mercedes Benz OBD: EDC17C43, EDC17C66, EDC17CP46, EDC17CP57, and EDC17CP60 Read, Virtual read, OBD write, and checksum correction. Audi, VW Boot Mode: Continental Simos 6.2, Simos 6.23, Simos 6.3 . Chevrolet Boot Mode: Ac Delco E86. GMC Boot Mode:…
Starting from this version Hexprog will be able to read/write and clone different Transmissions Control units (TCUs), this version brings BMW ZF 8HP and Continental 6HP to the action. Due to the high demand on VAG DCM6.2 and DCM3.7, Hexprog supports these Ecus starting from this update. BMW ZF 8HP50, 8HP75, 8HP90 factory mode: read, write…
This update brings more TCUs to Hexprog supported list, we are adding some of TEMIC TCUs for VAG in this release like DQ200, DL382 and VL381, as well as one of the most wanted TCUs, it is BMW EGS in E70 series. BMW ZF 8HP45 has been added in this version in factory mode: read, write…
A new Ecus family has been added to the supported list of Hexprog, this update brings the Ecus equipped with Renesas SH725 series. Hexprog will support these Ecus mainly using boot mode (Jtag connection) and many of these Ecus will be supported in factory mode. Abarth: Bosch ME7.9.10 Audi: TCU Temic DQ200 MQB, Continental Simos…
This release supports the Boot Assist Module for MPC5XXX (BAM), this will bring more demanded ecus/tcus to the supported list of Hexprog. Abarth Marelli 8GMF MPC5565 ECU Alfa Romeo Magneti 8GMF MPC5565 Alfa Romeo Bosch ME7.3.2 ST10C167 Alfa Romeo Bosch ME7.3.2, ME7.1.1 ST10C167 Alfa Romeo Bosch MED7.6.1 ST10F275 Alfa Romeo Magneti MJ8DF MPC5565 Chevrolet ACDelco E83…
Starting from this version Hexprog users can work with trucks Ecus/Tcus, some important trucks Ecus are supported now. We also added more Ecus from DELCO in boot mode. Trucks Ecus: Ford Truck: Bosch EDC7C1, EDC7C1/C2 Foton Bosch: DCU17, EDC17C55 Freightliner: Continental ACM2, Temic DDEC6 International: Bosch EDC17CV42 Isuzu: Denso 275700-7082 SH72546 ECU and TCU (Boot…
This version supports more Ecus with MPC5500 and MPC5600 series. Very important Ecus have been added to serve Hexprog users like DCM6.2A and DCM6.2C in PSA and Continental GPEC2x Trucks also has a share in this update, Continental ACM for Renault trucks is available now. Abarth: Marelli 8GMK Alfa Romeo: Magneti Marelli 9GF Chevrolet: ACDelco E98 Chrysler: Continental…